Phantom x Raid Research extended battery caps, designed by Raid Research and manufactured here in the USA.
These battery caps are not just an aesthetic upgrade, they also give you capacity to store an extra battery or run a single CR2050 and extend battery life. On top of that they also provide you with more purchase on the battery cap itself. No tool required for access to the battery compartment.
Quantities are limited, when they are gone they are gone, whether that takes 10 minutes or 10 months. Expect 2-4 weeks for fulfillment on these caps.
Here are the details straight from Raid Research:
This battery cap has been designed with simplicity and improvement in mind. It includes a new flat-spring that we have incorporated into the bottom of the battery cap to keep a safe and constant pressure on the seated battery in your optic while allowing for storage of an additional battery. These caps come with "donut" that you can insert in place of a second battery for the scenario you do not want to run two batteries stored in the cap while using the Aimpoint Micro Series (T-1/T-2 and H-1/H-2). We have improved the circumference texture with aggressive but comfortable knurling to account for use in wet, cold and gloved conditions. This product is brought to you by Raid Research and Shadow Strategic with the intent to bring you a solid and robust product. All caps are made of 7075T6 aluminum in the USA.
Testing: We have tested these on the optics below and have used each one with 50 rounds of .50 Caliber ammunition, all successfully functional after 50 cycles.
Our compatibility list is:
Aimpoint Acro P-2
Aimpoint T-1/T-2 H-1/H-2
Vortex Razor HD
Likely more including the ATIBAL enclosed red dot. If you would like to try this out, we can also assist post purchase.
IMPORTANT INFO
All caps come with the following:
(1) Billet battery cap.
(1) Milspec O-Ring
(1) Aimpoint T-2 single-battery spacer.
(1) Wave spring with glow-in-the-dark spring top.
FAQs
Does this allow for storage of an additional battery? Yes. If you are running to CR2032 batteries, you can flip one over to avoid stacking voltage.
If I stack batteries, can it cause damage to the optic? It can but we haven't seen a case where it can cause damage. We personally use CR2050 batteries instead of stacking batteries in a series.
Does this increase battery life? If you are using the CR2050 that (which has the same voltage output as CR2032), you will receive approximately 50% more battery life. You can only store one of these.
My optic isn't listed, it uses the same thread style, will it work? It might, but these are currently designed for use with the above listed optics.
